Open
Mar 1, 2019 | Latest News

What equipment is needed for glass bricks processing

Glass cutting machine refers to a kind of processing machinery specially used for glass processing and cutting. Glass cutting machine includes air-floating tables arranged at the beginning and the end, and double-bridge overpass tables. As an improvement, the first and second straight beams at the head of the upper frame length direction and the third straight beams at the head of the lower frame length direction and the fourth straight beams at the head of the lower frame length direction are equipped with glass conveyor mechanisms including rotating axles, several conveyor wheels, motors and belts; the air-floated sheet conveyor table is equipped with power control connected to the motor at the tail end of the length direction of the table surface. The upper end of the proximity switch is slightly lower than that of the mesa in the system circuit to control the starting and closing of the motor.

Feb 28, 2019 | Latest News

What equipment does art glass processing need?

​Hollow glass is composed of two or more layers of ordinary flat glass. Two or more pieces of glass are bonded and sealed with sealing strip and glass strip with high strength, high air tightness and sex compound binder around. Drying gas is filled in the middle and desiccant is filled in the frame to ensure the dryness of air between glass sheets. Its characteristic is that it has a certain cavity, and has good thermal insulation, heat insulation, sound insulation and other properties. Mainly used for heating, air conditioning, noise reduction facilities of the outer glass decoration. Its optical properties, thermal conductivity and sound insulation coefficient should meet the national standards.

Feb 27, 2019 | Latest News

Deep Understanding of Glass Counter Factory - Glass Processing Method

Carved glass is a kind of decorative glass with good taste in home decoration. The designs usually have personality "creativity", reflecting the interest and pursuit of the owner of the room. Every glass that has undergone secondary artistic processing can become art glass, ranging from tens of yuan to tens of thousands of yuan. The first grade should be ground glass, that is, the pattern is ground on white glass with sandblasting gun, with a lower grade. The biggest disadvantage is that the frosted part is easily dirty and can not be cleaned. It is ugly and cheap. Basic elimination.

Feb 26, 2019 | Latest News

Manufacturing Method of bathroom glass vessel sinks

​In the bathroom glass vessel sinks, a gap of 2.5 cm is reserved between the side plate glass and the bottom plate glass. The side plate glass and the bottom plate glass are directly connected by glass glue. There is no other connection method between the side plate glass and the bottom plate glass. In the process of gluing, the glass glue is not uniform, and there will be air bubbles, glue shortage, interface and other easy to leak.

Feb 25, 2019 | Latest News

Glass Casting Technology--Wax Loss Casting

​Principle of casting technology: melting glass and forming through die. Generally, after the mold has been manufactured, glass melt is injected into the mold or glass debris is stacked in the mold which has been pre-manufactured. The mold is melted in the furnace together with the mold, and annealed after the mold with glass area is anastomosed.

Feb 24, 2019 | Latest News

Advantages of Laminated Glass

​1.The sound insulation effect of modern living room has become one of the important factors for people to measure the quality of housing.
2.Many advantages of laminated glass, used in home decoration will have unexpected good results.

Feb 23, 2019 | Latest News

Recyclable glass bricks

​The original stone is made by hand in Northern California. Recommended range of use, indoor and outdoor areas, cold and warm environment (frost prevention), ground (suitable for commercial and residential buildings), wall, counter, vertical or horizontal surface, swimming pool, bathroom, including underwater surface, outdoor barbecue area, terrace, staircase and fireplace. It has the advantages of reliable, durable and high quality glass brick products.

Feb 22, 2019 | Latest News

The Processing Method of Art glass

Art glass is made of float glass. The thickness of the glass depends on the shape and requirement of the product. But the glass must be cleaned and dried again. If there are oil stains and dirt, it will be displayed on the surface of the glass after hot working. The tin surface of the glass must be down to determine which side of the glass is the tin surface. The tin surface detector can be used, and the cutting section can also be observed, which can be judged by experience.