Glass melting furnace is the thermal equipment of glass counter factory. It usually uses refractories to form working layer. It uses the heat generated by burning chemical energy, electric energy or other energy to create a controllable high temperature environment (distribution and atmosphere), so that glass batch can pass through the process of energy, mass and momentum transfer in the base to complete physical and chemical changes. After melting, clarifying, homogenizing and cooling, a certain quantity and quality of glass liquid is provided for production.
Although the sink is a bathroom decoration accessories, but in all kinds of bathroom supplies, the use of the bathroom glass vessel sinks is the highest frequency. Before and after meals, 65% of the time to deal with the sink, so its importance to family life is self-evident, so the choice of a practical, beautiful, wear-resistant, brush-resistant, easy-to-clean sink is very necessary.
Because lead oxide-containing glass (commonly known as artificial crystal) has a diamond-like high refractive index and high fluidity at high temperatures, casting glass is often made of artificial crystal. In the Chinese market, the above-mentioned dewaxed cast lead crystal glass products are generally referred to as colored glass. The dewax casting method can be used to produce complex and exquisite crafts.
The glass is melted and molded. Generally, after the mold has been manufactured, glass melt is injected into the mold or glass debris is stacked in the mold which has been pre-manufactured. The mold is melted in the furnace together with the mold, and annealed after the mold with glass area is anastomosed.
bathroom glass vessel sinks: A fashionable sink for your bathroom and budget. This glass tank is easy to install and clean.
Grinded glass flume: This kind of Grinded glass flume is modern and fashionable, reminiscent of seawater glass. Perfect supplement to the coastal bathroom budget.
The material of fused glass is float glass. The thickness of glass depends on the shape and requirement of the product. But the glass must be cleaned and dried again. If there are oil stains and dirt, it will be displayed on the surface of the glass after hot working. The tin surface of the glass must be down to determine which side of the glass is tin surface. The tin surface detector can also be used to observe the cut section. Experience to judge.
Glass brick partition seems to be used very much in our lives, and not only in the home decoration is very common, in many office space will often see this type of partition. What are the characteristics of such partitions?