The material of fused glass is float glass. The thickness of glass depends on the shape and requirement of the product. But the glass must be cleaned and dried again. If there are oil stains and dirt, it will be displayed on the surface of the glass after hot working. The tin surface of the glass must be down to determine which side of the glass is tin surface. The tin surface detector can also be used to observe the cut section. Experience to judge.
Glass brick partition seems to be used very much in our lives, and not only in the home decoration is very common, in many office space will often see this type of partition. What are the characteristics of such partitions?
The powder and clinker matched by glass composition are melted in crucible kiln or tank kiln (see glass melting kiln). After melting, the glass liquid is clarified to be uniform, bubble-free, stone-free and stripeless, and then cooled to the viscosity range suitable for the corresponding molding method.
Speaking of laminated glass sound insulation, a common misconception is that the thicker the thickness, the better the insulation. It's half right! For monolithic glass, the thicker the thickness is, the better the sound insulation will be. 8mm thick sound insulation is better than 5mm. According to the current market survey, most aluminum doors and windows practitioners believe that a single piece of 5mm glass has no sound insulation effect (even with a good window frame), or to 8mm to be effective.
Explosion-proof glass is a kind of glass that can prevent violent impact. It is a special glass made by machine with special additives and interlayer. Even if the glass is broken, it will not fall off easily, because the intermediate material (PVB film) or the other side of the glass has been fully bonded. Therefore, explosion-proof glass can greatly reduce the damage to personnel and valuables when encountering violent impacts.
Folding glass countertop table surface is a fire-proof board layer or molding board, surrounded by plastic strips or aluminum alloy strips from the edge, must not be water directly poured on the table or wiped with a water cloth directly, so it is very easy to cause desktop edge inflow swelling damage, maintenance, the first use of a semi-dry wipe cloth with detergent Clean up the oil stains on the desktop, then wipe them with a dry rag. In order to prolong the service life of the desktop, please pat the automobile wax on the desktop once every 1-3 months (car decoration shop is available). This is not only beautiful, but also can avoid water, and can extend the life of the desktop.